Custom Products for the Digital Radio Amateur Enthusiast
  Print this Page

USB Digital Radio Adapter Interface Board
For Digital Two-Way Radio Applications

Product Support Documentation
Model DRA-30



Top side of DRA-30 circuit board - shown slightly enlarged.
(Click photo to show a larger image)

Bottom side of DRA-30 circuit board - shown slightly enlarged.
(Click photo to show a larger image)

Schematic Image - Click to download a high quality PDF.

Overview of DRA-30
1, Use with VARA FM or other digital communications requiring a very high quality sound card.
2, DB9 pinout compatible with Kantronics KPC series TNCs.
3, Kits come with the surface-mount IC preinstalled.

Parts List:
If you purchased our kit, refer to the parts list and make sure you have all of the components you need to build it.
Click here for Parts List.

Construction/Assembly:
Click here for assembly instructions and construction notes - with large photo.

Jumper Settings:
Click here for Header / Jumper settings and other board connection assignments.

DB9 Pinout:
Click here for DB9 Pinout.

Installation:
This device is intended to be installed inside a radio, computer, or plastic box for protection. Refer to the schematic for the pinout of the DB9F where all of the logic signals, power connections, and audio signals are listed.

Recommended powering requirements:
The board is supplied with 5 VDC from the USB connection.

Recommended receive audio input level:
The DRA-30 accepts the widest range of audio compared to any other similar radio adapter. The input signal is attenuated by a potentiometer, giving the broadest range of acceptable levels. If your receive audio level is adjustable or programmable, we recommend around 2.0 volts P-P. This allows very good signal-to-noise ratio and low cabling cross talk. This level results in a 50% rotational setting of the potentiometer.

Optional Plastic Case:
A Plastic Case is available optionally for the DRA-30. Available in several colors!

Which C-Media chipset is used?
All DRA series radio adapter boards are supplied with a Genuine C-Media CM119A.

The PC board was designed to be versatile. A CM108 and CM119 is also acceptable. There are slight differences between these components, and the board can be 'programmed' to accept any of the three.

Information on the CM119A.
Click here to download a manual for the C-Media CM119A.

Secure PayPal ordering is available on the DRA-30 main page.

Custom radio cables are available from URI Cables. They will build a custom cable for the DRA-30 for many radios.

Email Kevin Custer for support, ordering information, order by check, or support of this exciting product.
 
 

Product of Masters Communications, all rights reserved.
Specifications may change without notice.
Images property of Kevin Custer - W3KKC
Board layout by Kevin Custer - W3KKC.
HTML January 14, 2020, W3KKC All Rights Reserved!