DRA-SR-DIN6 Digital Radio Adapter Interface

Custom Products for the Digital Radio Amateur Enthusiast

Model DRA-SR-DIN6
"DRA-Slusb-Retro-DIN6"
A Radio Interface for Digital Two-Way Radio Applications

Pricing:

Unassembled Kit - $99.00 - each.

Assembled and Tested - $145.00 - each.

The DRA-SR-DIN6 is designed for those who own a Tigertronics SignaLink™ USB and want to retrifit it to have DRA functionality and performance, along with a Mini-DIN-6 radio connector.
You'll use your existing aluminum case, plastic end panels, and knobs. Just remove the original circuit board and replace it with our retro-fit board.
We even give you the tools to make the swap easy!

US shipping and handling $18.50 (price depends on quantity)
First-Class shipping available to most locations worldwide, calculated at checkout.
PayPal accepted - order below.

The DRA-SR-DIN6 is compatible with most "data capable" radios
that have a dedicated Mini-DIN-6 data port.

DRA-SR-DIN6 photos - shown larger than actual size.
(Click image to see bottom view)

Summary Description:

Be sure to read the detailed description from the link below.
The DRA-SR-DIN6 is similar to the SignaLink™ USB with several major changes.
It doesn't have transformers, and is not galvanically isolated.
It has Hardware PTT for the quickest turn around (ACK/NAK) times.
"SR" models are based on our DRA-80 and is considered a "DRA Series" product.
It uses a high-quality reed relay, and its operation is nearly silent.
Works with the ICOM IC-706MKIIG and other difficult to interface radios.
Adjustable VOX Delay of 0 up to 1.5 seconds is controlled from the front panel "DLY" potentiometer.
The radio connector is a female Mini-DIN-6.
All LEDs, controls and connectors on the DRA-SR are located in the original locations. **
Multi-color power LED to indicate the operational status of the unit.
Jumper selectable attenuators for RX and TX audio level to help prevent overdrive with some radios.
You won't salvage anything from the original circuit board - it stays complete.
The circuit board is designed for low-noise and high signal to noise ratio.
Comes with 2 Allen wrenches - 3/32" for the end panels, and 1.5MM for the knobs.

** NOT all functions have been duplicated - this is covered in detail in the link below.
Ordering:
Detailed Description & Secure PayPal Ordering

Product Support:
Installing the DRA-SR board into the SLUSB Case - step-by-step instructions for installing the DRA-SR circuit board into the SignaLink USB case.

Support Documentation - schematic, jumper settings, parts list, installation and set-up instructions for the DRA-SR-DIN6.

Construction Article

VOX Operation

DRAC-12 - 6-foot Mini-DIN-6 Radio Cable can be added optionally to connect several data capable radios to the DRA-SR-DIN6.

Email Kevin Custer for support of this exciting product.

Product of Masters Communications, all rights reserved.
SignaLink™ and SignaLink USB™ are trademarks of Tigertronics.
The use of the name SignaLink and/or SignaLink USB is only in reference to this product.
No infringement for such use is intended.
Specifications may change without notice.
Images are property of Kevin Custer - W3KKC
Board layout by Kevin Custer - W3KKC
HTML June 24 2021, W3KKC All Rights Reserved!