Custom Products from Masters Communications

Model DRA DIN-6
A Connector Adapter for the DRA-Series Radio Adapters
DB9 to Mini DIN 6

Pricing:
Assembled and Tested - $14.00 each.

Shipping and handling is calculated at checkout for US and International orders.
First-Class shipping available to most locations worldwide, calculated at checkout.
PayPal accepted - order below.

---

DRA DIN-6 Adapter top photo - shown larger than actual size.
(Click image to see bottom)
Shown Assembled and Tested (A&T).
RX Baud jumper shown in the "9600 Baud" position.

DIN Pinout Illustration:
Click to view larger image.

Schematic Image:
For larger view - right click to "View Image" or left click to download a PDF.

This connector adapter attaches to any of the DRA-Series radio adapters from Masters Communications that use the DB9 radio connector.  It converts the DB9 female to Mini-DIN-6. It allows an inexpensive Mini-DIN-6 male-to-male cable to be used between the radio adapter and radios with a Mini-DIN-6 accessory (data) connector.

This adapter is not for adapting DB9 connectors on radios.

RX baud rate is selected from a 3 pin header / jumper. - 1200 - 9600.
No soldering required.

Detailed Description:
The Male DB9 connector attaches securely to the radio adapters female DB9 with the provided screws. A movable header/jumper selects either 1200 or 9600 baud receiver audio.

Use this adapter with the DRAC-12 cable.

Available assembled and tested (A&T) with (2) - 4-40 screws.

Secure PayPal Ordering:
Quantity can be changed at PayPal after pressing the "Add to Cart" button.

Shipping amount is calculated at checkout for shipping to most locations Worldwide.

Email Kevin Custer for ordering information, ordering by check, and/or support of this exciting product.

Product of Masters Communications, all rights reserved.
Specifications may change without notice.
Images are property of Kevin Custer - W3KKC
Board layout by Kevin Custer - W3KKC
HTML July 13, 2021, W3KKC All Rights Reserved!