Custom Products from Masters Communications 		  Print this Page

Model Alinco-6

DB9 Male to Mini DIN 6 female data port connector adapter for some Alinco, Yaesu, and TYT radios.

Converts the radio's DB9 data jack to Mini-DIN-6 female.

Works on the DR-06T, DR-135, DR-235, and DR-435 (all vintages) - Possibly others.

Works on the Yaesu FT-2600 mobile.

When paired with the AC-25 Accessory Connector works on Alinco DR-X38 and TYT TH-9000 radios.

Two sets of screws are provided.
Older models use 4-40 thread, while newer models (like DR-135TMKIII) are metric. We provide 2 screws of each type.
Be careful when tightening the screws. Damage to the DB9 male on the adapter is possible if the screws are torqued too tightly.

Pricing:
Assembled and Tested - $14.00 each.

Shipping and handling is calculated at checkout for US and International orders.
First-Class shipping available to most locations worldwide, calculated at checkout.
PayPal and most Credit and Debit Cards accepted - order below.


Alinco-6 top photo - shown larger than actual size.
(Click image to see bottom)
TX Baud Jumper shown in "9600 Baud" position.

TX Baud Rate Selection Header Illustration:
Movable jumper shown in the "9600" position.
Click to view larger image.

Alinco-6 shown installed on a DR135 radio:
Click to view larger image.

Alinco-6 shown installed on a DR135 radio:
Click to view larger image.


Description:
This connector adapter attaches to SOME Alinco radios that have a DB9 data (modem) jack with two supplied screws. This adapter also works on the Yaesu FT-2900 mobile. There are some other radios and other manufacturers that also use a DB-9F connector and the wiring is totally incompatible. Please do the research to know if your radio is compatible.

It converts the DB9 female on the radio to Mini-DIN-6 female, allowing an inexpensive Mini-DIN-6 male-to-male cable to be used between the radio and radio adapter, as long as no internal modem card is installed. If the optional EJ-41U internal TNC board is installed, this adapter won't work. You can remove the internal modem and wire the DB9 bypassing the modem so it works properly.

Installation:
Two sets of screws are provided.
Older model Alinco radios use 4-40 thread, while newer models (like DR-135TMKIII) are metric and have a finer pitch. We provide 2 screws of each type.
Be careful when tightening the screws. Damage to the either connector is possible if the screws are torqued too tightly. Snug is fine.

TX baud selection between 1200 and 9600 baud is done by moving a mechanical jumper "short". No soldering required.

Optional Connection:
Hole 8 = Optional connection to the radios DB9 pin 8.

Available assembled and tested (only) with screws.

Secure PayPal Ordering - Use button to add item to cart.
Quantity can be changed at PayPal after pressing the "Add to Cart" button.


Shipping amount is calculated at checkout for shipping to most locations Worldwide.

Email Kevin Custer for ordering information, ordering by check, and/or support of this exciting product.

Product of Masters Communications, all rights reserved.
Specifications may change without notice.
Images are property of Kevin Custer - W3KKC
Alinco photos credit John "JT" Trinterud K9ONR
Board layout by Kevin Custer - W3KKC
HTML December 27, 2020, W3KKC All Rights Reserved!